Porsche Wallbox PWB22E212 Manuel D'utilisation page 39

Authorisation options
Authorisation Description
Free charging (authorisa- The Wallbox charges without interacting with the user or
tion-free mode) the vehicle.
Porsche Wallbox calibration law: Free charging is deacti-
vated upon connection to the backend. Authorisation is
required for each charging process.
RFID chip The user holds an RFID chip to the sensor on the design
front of the Wallbox.
Plug & Charge (private) Once approved, vehicles with enhanced communication
in accordance with ISO 15118 can be authenticated at
the Wallbox independently using a certificate, without
the user having to take further action at the Wallbox.
My Porsche App Charging can be approved via the My Porsche App.
Preconditions
b Backend connection is activated and established for the Wallbox.
b The option for charging without access authorisation is activated in
the My Porsche App.
b Backend connection is activated and established for the Wallbox.
b The option to charge with access authorisation is activated for the
Wallbox.
b RFID chip was registered with the Wallbox.
b RFID chip is held to the sensor and detected by the Wallbox.
b Vehicle supports enhanced communication, and it is enabled on the
vehicle.
b Backend connection is activated and established for the Wallbox.
b PLC vehicle connection is enabled for the Wallbox.
b The vehicle's Plug & Charge certificate is recognised as valid by the
Wallbox.
b Vehicle was released once.
b The My Porsche App is opened and the overview "Begin charging" is
selected.
b Backend connection is activated and established for the Wallbox.
b Remote authentication option is enabled for the Wallbox.
Set up | EN
37