Porsche Wallbox PWB22E212 Manuel D'utilisation page 38

EN | Set up
When the Wallbox is put into operation for the first
time, it is initially in a mode requiring no access au-
thorisation (Free Charging). The access mode is set
to Free.
With the access mode Free, charging begins as
soon as a vehicle is connected. No authorisation is
required.
With the access mode Restricted, charging must be
authorised using a suitable method.
Manage Limited Access mode
Manage vehicle authorisation
b Vehicle cable plugged in
b Access mode Restricted selected
e
Tap on Vehicles.
�� Your Porsche (fully electric) is displayed in the
Vehicles overview as soon as it is connected
via the vehicle charging cable, and charging can
then be authorised for that vehicle.
36
Manage RFID cards
b Access mode Restricted selected
e
Tap on RFID cards.
�� RFID cards can be added to the list of authorisa-
tions in the RFID cards overview.
The authorisation can be toggled on and off for
cards already listed.
Information
If the RFID chip is not detected correctly, the LED
on the design front turns red.
e
Hold the RFID chip to the sensor again.
e
Check whether the RFID chip is compatible with
the Wallbox.
– or –
Enter the identification number and identifica-
tion of the RFID chip in the My Porsche App in
the RFID cards overview.
Information
Your Wallbox can learn to recognise your Porsche
Charging Service card as an RFID card.