B Applies to: Porsche Wallbox with charging socket
Type-2 charging socket
-
Type of power supply: AC
Standard: EN 62196-2
Design: Type 2
Voltage range: ≤ 480 V RMS
Initial operation and configuration
Initial operation
Testing during initial operation
NOTICE
During initial operation, the correct installation and
electrical safety of the Wallbox must be checked by
an electrician (e.g. in accordance with DIN VDE 0100
for Germany).
See the installation instructions for further informa-
tion.
Initial operation using the My Porsche App
b AC Wallbox installed and ready for operation
b Ethernet cable connected to the AC Wallbox
– or –
LTE network available
b Letter with the access data is in hand
b My Porsche App is installed and logged in with
Porsche ID
1. Press
to switch on the Wallbox.
turns white when the Wallbox is ready for
operation.
2. Use your mobile device to scan the QR code on
the letter with your access data.
The charging equipment selection is opened
in the app.
3. Select Add charging equipment.
The QR code scanner is opened.
4. Rescan QR code.
The login window Add charging equip-
ment is opened in the app.
5. Enter the serial number and the PUK from the
letter with your access data.
The window Select country opens.
6. Select the country where the Porsche Wallbox
is installed.
The Porsche Wallbox is logged in and can be
operated via the My Porsche App.
Information
When the Wallbox is put into operation for the first
time, it is initially in a mode requiring no access au-
thorisation (Free Charging). The access mode is set
to Free.
Open the device overview in the My Porsche
App
b My Porsche App is installed and logged in with
Porsche ID
b The Wallbox is put into operation via the My
Porsche App
1. Tap on Account
2. Tap on Charging equipment
An overview of the Wallbox with all device infor-
mation is displayed.
Log in to the Wallbox
Set access mode
b Device overview opened in My Porsche App
1. Tap on Equipment settings.
2. Tap on Access mode.
Set up | EN
35