Publicité
Les langues disponibles
Les langues disponibles
EN | Set up
General settings
Change device name
A default device name is assigned to the Wallbox.
The name can be changed in the My Porsche App.
The change is automatically adopted in the My Por-
sche Portal
b Device overview opened in My Porsche App
1. Tap
next to the device name.
2. Enter the desired name in the input field.
3. Select Save.
Energy save mode
When this setting is enabled, the Wallbox goes into
energy save mode after a certain period of time with
no user interaction, if the Wallbox has no active fault
and if no charging occurs.
The energy save mode is activated after approx. 5 to
20 minutes, depending on the activity in the web app
or in the MyPorsche app.
Enable/disable energy save mode
b Logged into the web app as a service user
1. Select Wallbox settings in the navigation.
2. Select Energy Save.
3. Enable/disable energy save mode (default set-
ting).
Information
The connection to the backend is interrupted if en-
ergy save mode is enabled. In the My Porsche App,
the Wallbox is displayed as offline.
38
Exiting energy save mode
e
Plug in vehicle charging cable
– or –
.
On the Wallbox, press
briefly
Exporting the charge history
The last charging operations are shown in the device
overview of the Wallbox.
b Device overview opened in My Porsche App
1. Tap on Show charge history.
�� The last charging operations are listed.
2. Tap Export charge history.
3. Select the desired charging operation and tap
Export PDF.
�� The PDF can be saved on the mobile terminal or
emailed.
Resetting to factory settings
Deactivate Wallbox via the My Porsche App
b Device overview opened in My Porsche App
e
Tap Disable charging equipment.
�� The Wallbox is reset to factory settings.
The Wallbox is no longer connected to the My
Porsche App and is displayed as inactive.
All charging operations will still be visible in the
device overview.
No more settings can be configured.
The Wallbox can be reactivated by restarting it.
All previous settings will be restored.
Delete the Wallbox via the My Porsche App
b Device overview opened in My Porsche App
e
Tap Delete charging equipment.
�� The Wallbox is reset to factory settings.
With the exception of the country code, all cus-
tom settings are reset to factory settings, e.g.
vehicle authorisations.
Information
−
A complete reset to factory settings must be
carried out by a qualified electrician. For more
information, see the installation instructions.
−
After the reset, the Wallbox is restarted.
Adapt the charging current
Configuring the maximum current
NOTICE
e
The maximum adjustable value is automatically
limited by the current carrying capacity of the
vehicle and the mains connection.
e
The maximum charging current supplied by the
mains connection is configured by a qualified
electrician when installing the Wallbox. See the
g Installation instructions
e
Consult a qualified electrician for more informa-
tion.
It can be helpful to specify the maximum charging
current if no energy management system is available.
Publicité
