LG H12S1D Manuel Du Propriétaire page 51

Using Auto Clean+ Function
In the Cooling and Dehumidification modes,
moisture is generated inside the indoor unit. You
can reduce that moisture.
1
Turn the appliance on.
2
Press the Function button.
3
Press the or button until the below icon
L M
flashes at the bottom of the display screen.
Then press the Function button.
4
Press the or button to set the desired
L M
status of Auto Clean+ function.
• Each time button pressed, the function
changes in this order: Sto
5
Then press the Function button.
NOTE
• The Auto Clean+ function is set up when you
purchased the appliance. If you don't want to
use this function, turn it off.
MAINTENANCE
& ON & OFF
51