LG H12S1D Manuel Du Propriétaire page 31

3
Press or button to set the below icon
L M
flashes at the bottom of the display screen.
Then press the Function button.
4
Press the or button to set absence
L M
detection function.
• Each time button pressed, the function
changes in this order: ON
5
Then press the Function button.
NOTE
• The Direct and Indirect Airflow operation are
available with Cooling, Heating mode.
• The sensitivity of the radar sensor may vary
depending on the indoor environment and
conditions, including:
- If there is little movement, such as while
watching TV or sleeping
• Moving objects such as fans, robot vacuum
Sleep Timer
You can set the appliance to turn off automatically
after a set time. The appliance will automatically
change the temperature, fan speed and airflow
direction. There are two ways to set the sleep timer.
This function can be set when the appliance is
turned on.
Method 1
1
2
OFF
&
- If you are sitting on the floor close to the
appliance
- If you are in a location far from the appliance
approximately 5 m (16 ft) or more
cleaners, or companion animals may be
mistaken for people.
Turn the appliance on.
Press the Function button.
OPERATION
31