OPERATION
20
Using Operating Modes
Operating with the Wireless
Remote Control
Point the wireless remote control towards the
signal receiver at the right side of the appliance to
operate it.
NOTE
• The wireless remote control may operate other
electronic devices if it is directed towards them.
Make sure to point the wireless remote control
towards the appliance signal receiver.
• For proper operation, use a soft cloth to clean
the signal transmitter and receiver.
• If a function included on the remote is not
supported on the appliance, the appliance may
not indicate this by buzzing.
Cooling, Auto,
Dehumidification, Heating, Fan
Mode
You can change the operating mode when the
appliance is turned on.
1
Turn the appliance on.
2
Press the Mode button repeatedly to change
the operating mode.
Cooling mode
w
Auto Operation mode / Auto
N
*1
changerover mode
*1 It automates the process of
choosing the right settings for
your space.
Dehumidification mode
q
Heating mode
v
Fan mode
G
3
Press the
J
or
K
temperature.
button to set the desired