Publicité
Les langues disponibles
Les langues disponibles
SMART FUNCTIONS
44
By repeatedly freezing and thawing the heat
exchanger of the air conditioner, contaminants
such as dust are washed away and the appliance is
kept clean.
appears on the display of the indoor unit and
FC
the cleaning progress from
NOTE
• The Freeze Cleaning function will end after the
appliance has dried.
• If the humidity in the room is high when the
Freeze Cleaning function is operating, the area
near the indoor unit may become foggy.
• The Freeze Cleaning function can be used
indoors at 21
7
to 32
to 37
. The Freeze Cleaning function is a
7
hygiene management function, not a cooling
function, so the usage conditions may vary from
the guaranteed cooling temperature of the
appliance.
• If the Freeze Cleaning function is operated at a
temperature outside of the allowable range, a
beep sounds 5 times and the function does not
work.
- The code in the image below will be displayed
on some indoor units.
• The Freeze Cleaning function is available even
when the appliance is running.
• If you press the
t
button on the appliance or on
the remote control during the Freeze Cleaning,
the Freeze Cleaning function is deactivated.
• During the Freeze Cleaning, a "tick-tick-" or
"tack-tack" noise may be heard as the appliance
expands or contracts.
• After the Freeze Cleaning, the appliance will
automatically shut off. When the power is turned
back on, it will operate in Cooling mode.
• If the Timer function is set, the Freeze Cleaning
function may not operate properly.
• Cool air comes out of the outlet when the Freeze
Cleaning function is activated.
• When connected to the Multi Outdoor unit, this
functions may not be supported.
to
is displayed.
O
GG
7
and outdoors at 21
kW Manager (On Some Models/
LG ThinQ)
The air conditioner power consumption is
automatically adjusted based on a schedule and
target power consumption set by the user.
appears on the display of the indoor unit on
EO
some models.
NOTE
7
• When using kW Manager function, the output of
cold air may be reduced, depending on the
remaining target power amount.
• When the target electricity consumption is
exceeded, the kW Manager function is disabled.
• When using the Heating and Auto modes, the
kW Manager function is disabled.
• When connected to the Multi Outdoor unit, this
functions may not be supported.
• The power usage shown through the LG ThinQ
application may differ from the actual power
usage shown on your utility bill.
• Power consumption information may vary
depending on the appliance.
• Power consumption may differ from results
measured using other measuring devices.
• Depending on the environment in which the
device is installed, measured power
consumption may vary.
• Measured power consumption may vary
depending on the usage environment or usage
method of the home appliance.
• When setting the usage time, the appliance does
not automatically turn on or off.
• Even during the operation of the kW Manager
function, the function set with the remote
control is reflected first.
• Actual usage may differ.
Publicité
