• If the Jet Mode button is pressed while the Low
Heating function is running, the function is
disabled and the Jet Heating mode is turned on
immediately (on Jet Heating models).
• If an error occurs, operation may be interrupted
to avoid damage to the appliance.
• The Soft Air and
y
while the Low Heating function is in operation.
•
is displayed on the indoor unit.
LH
• The room temperature is controlled to around
10
. The temperature is changed according to
7
the appliance.
• When connected to the Multi Outdoor unit, this
functions may not be supported.
Checking Room Temperature
You can check the current room temperature.
Type A
1
Turn the appliance on.
2
Press the Function button.
buttons cannot be used
3
Press the
or
button until the below icon
L
M
flashes at the bottom of the display screen.
Then press the Function button.
Type B
1
Turn the appliance on.
OPERATION
39