STORZ & BICKEL Plenty Mode D'emploi page 50

7. C O M M I S S I O N I N G A N D O P E R AT I O N
266°F
130°C
142°C
288°F
154°C
310°F
Vaporization temperature scale
7.2. Temperature Setting
The vaporization temperature may
fluctuate in comparison to the stated
values because of the heating and
cooling processes in the heat ex-
changer.
Select the desired temperature with
the adjustment wheel of the tempera-
ture safety regulator.
396°F
202°C
190°C
374°F
178°C
166°C
352°F
331°F
Choose temperature
The PLENT Y Hot Air Genera-
tor is equipped with a temper-
ature safety regulator.
When the auto off release handle is
first activated and the set temperature
is reached, the heating process is ter-
minated and the heater is turned off.
If the auto off release handle is
pressed while the PLENT Y is held in
the hand during operation, then the set
temperature level will be automatically
retained.
Once the temperature of the heat ex-
changer cools off, an automatic re-
heating will not occur; instead the cool-
ing process continues until the orange
auto off release handle is pressed
again.
As soon as the orange control lamp
turns off, the set temperature has been
reached, and the heat exchanger's
warming process is complete. Once
50