2 . S A F E T Y R E C O M M E N D AT I O N S ,
2.2. Warnings
This Vaporizer may only be used
by adults. Persons with reduced
physical, sensory, or mental abilities
or lack of experience and knowledge
may use the Vaporizer only if they are
supervised or have been instructed
in the safe use of the Vaporizer and
understand the resulting hazards.
If the Power Cord of the device is
damaged, it must be replaced with
a special Power Cord available from
the manufacturer or its customer
service.
The device has hot surfaces to allow
active components to vaporize. The-
se surfaces should not be touched
during use.
The device may only be used for the
vaporization of the recommended
herbs and plant parts. The use of
other substances may cause poiso-
ning or fire.
The packaging elements (plastic
bags, polystyrene parts, cardboard
boxes, etc.) must not be made
accessible to children as they pose a
potential danger.
Ensure that all vapors, e.g. from
flammable cleaning agents and disin-
fectants, have evaporated before
switching on the Hot Air Generator.
Ensure that the Mouthpiece and Coo-
ling Coil are free of inhalable foreign
bodies.
E X P L A N AT I O N O F S Y M B O L S
People who require assistance must
be supervised constantly during ap-
plication. Often, the danger posed by
the Power Cord (e.g., strangulation) is
misjudged, which may pose a risk of
injury.
The device contains small parts
which can block the respiratory tract
and lead to choking. Therefore, make
sure that you always keep the Hot Air
Generator and accessories out of the
reach of babies and children.
Do not operate the Hot Air Generator
close to flammable objects such as
curtains, tablecloths, or paper.
The Hot Air Generator may only be
repaired by our Service Center.
Danger to life when opening the Hot
Air Generator as live components
and connections are exposed.
The Hot Air Generator must never
be repaired or transported when
the power plug is plugged in. The
ventilation slots and the hot air outlet
opening of the Hot Air Generator
must not be held shut or blocked du-
ring operation or the cooling phase.
The heating block inside the Filling
Chamber Threading and the Filling
Chamber Cylinder are composed of
metal and heat up during operation.
Never touch them when they are hot.
The Filling Chamber may only be put
on during use. After use, the Filling
Chamber must be removed from the
Hot Air Generator to avoid excessive
42