Kärcher HD 13/35-4 Cage Mode D'emploi page 15

Proper use
Use this high pressure cleaner exclusively
for:
– Cleaning machines, vehicles, buildings,
tools.
– with accessories and spare parts ap-
proved by Kärcher.
Symbols on the machine
High pressure jets can be
dangerous if improperly
used. The jet must not be
directed at persons, ani-
mals, live electrical
equipment or at the appli-
ance itself.
Danger of damage to the
machine on account of
frozen water! Store the
appliance in a heated-
room during winter or
empty it.
Risk of hearing impair-
ment. Always use proper
ear-protection aids while
working with the appli-
ance.
Risk of injury! Wear safe-
ty goggles.
Risk of burns on account
of hot surfaces!
According to applicable regula-
tions, the appliance must never be
used on the drinking water net
without a system separator. A suit-
able system separator by KÄRCHER or al-
ternatively a system separator according to
EN 12729 type BA must be used.
Water that was flowing through a system
separator is considered non-drinkable.
Always connect the system separator to
the water supply, never directly to the appli-
ance!
Safety instructions
Danger or hazard levels
DANGER
Immediate danger that can cause severe
injury or even death.
WARNING
Possible hazardous situation that could
lead to severe injury or even death.
CAUTION
Possible hazardous situation that could
lead to mild injury to persons or damage to
property.
High pressure hose
DANGER
Risk of injury!
– Only use original high-pressure hoses.
– The high-pressure hose and the injec-
tion system must be suitable for the
maximum operating pressure given in
the Technical Data.
– Avoid contact with chemicals.
– Check the high-pressure hose daily.
Do not use hoses with kinks.
Stop using the high-pressure hose if the
external wire layer is visible.
– Do not use the high-pressure hose any-
more if the winding is damaged.
– Lay the high-pressure hoses in such a
way that no vehicle can drive over it.
– Do not use high-pressure hoses that
have been driven over, kinked, pressed
or bent even if there is no externally vis-
ible damage.
– Store the high-pressure hoses in such a
way that they are not subject to any me-
chanical load.
– The maximum torque for the screw con-
nections of the high pressure hose is 20
Nm.
– 2
EN 15