Hillrom Allen A-71102-JP Mode D'emploi page 63

INSTRUCTIONS FOR USE
• The unit is not intended for patient transport. However, if you must use the unit
to transport a patient, make sure that the unit is in its lowest position and the
patient is in a level position (not tilted).
• Before you transport the unit, make sure of these:
– The unit is in its lowest position.
– The power cord is disconnected from the facility power outlet and stored on
the unit.
– Accessories, supports, and any equipment that is to be transported with the
unit are within the perimeter of the unit and secure on the unit.
• During transport, make sure to do these:
– Use caution so that the unit does not tip or overbalance.
– For inclines and thresholds, approach them as you move forward or
backward, rather than sideways.
– Push the unit safely; do not make sharp corners or turn the unit at high
speeds.
• Do not use tape on the Allen Advance Table. Adhesive residue could affect
the functions of the Allen Advance Table or the support tops.
• The power cord set may not be used with any equipment other than the Allen
Advance Table A-71102-JP included in the package.
• Keep this manual available for future reference.
CAUTION:
Do not exceed safe working load shown in the product specification table
Document Number: 80028193
Version: G
Page 63
English
Issue Date: 03 FEB 2023
Ref Blank Template: 80025117 Ver. F