Operation; Operating The Induction Hob - ETNA KI290ZT Mode D'emploi

OPERATION

Operating the induction hob

Use of the touch keys
Put the tip of your finger flat on the touch key. Do not apply pressure.
The touch keys react to a light fingertip touch. Only operate the touch keys with your finger.
The touch key gives a short audio signal when it engages.
1. Touch and hold the On/Off key until you hear an audio signal.
The hob is switched on.
▷
Zero (0) appears in all displays.
▷
2. Touch within 10 seconds the minus (-) or plus (+) key twice to select a cooking power level.
Touch if desired the boost key to start the boost power level.
The cooking zone starts at the set power level, visible in the display.
▷
▷ When boost is selected the boost indicator P and the previous power alternately flash
in the display. After 8 minutes on boost level the cooking zone switches back to the
previous power setting.
Touch boost P again to switch off the boost setting.
▷
EN 13