ETNA KI290ZT Mode D'emploi page 35

OPERATION
4. The timer has been set.
The cooking zone will switch off after the set time has passed.
▷
The timer indication light blink.
▷
▷ The timer alarm beeps after the set time has passed.
Touch the timer key to stop the alarm.
▷
Changing preset cooking time
Cooking time can be changed anytime during the operation.
1. Touch the timer keys (one or two times) to select the zone of which you want to adjust the
timer.
2. Touch the plus (+) and minus (-) keys to change the time.
If time is not modified in 10 seconds since touching the keys, the timer is keeping the
▷
countdown before the adjusting operation.
Checking remaining cooking time
The timer displays shows the remaining time from the cooking zone for which the point adjacent
to the timer display is flashing.
1. Touch the timer keys (one or two times) to select the zone of which you want to see the
remaining time.
A flashing point adjacent to the timer display indicates the cooking zone to which the
▷
timer is linked.
The timer will display the remaining time of the selected cooking zone.
▷
Turning timer off
If you want to switch off the timer prior the end of preset time:
1. Touch the timer keys (one or two times) to select the zone of which you want to disable the
timer.
2. Touch the minus (-) key to the value "0".
The illuminated point assigned to the cooking zone goes out.
▷
EN 15