Struers Unitom-50 Manuel D'instructions page 10

Software Settings
Configuration Menu
6
Unitom-50
Instruction Manual
Switch on the power at the main switch. The following display
will appear briefly:
Afterwards, the display will change to the screen for cutting.
Press ESC to come to the MAIN MENU.
ESC
D
The MAIN MENU is the highest level in the menu structure.
From here you can go to cutting or to the configuration menu.
mN
Press MENU DOWN
D
e
Press ENTER
menu.
D
mN
to select CONFIGURATION.
e
to activate the CONFIGURATION