Struers Unitom-50 Manuel D'instructions page 213

Specifi cation
Unitom-2
Manual Cut-off machine.
4.7 kW (6.4 HP) motor. For 350 mm cut-off wheels. With recirculation
cooling unit (capacity 65 l) and two cutting tables with 10 mm T-slots.
Table unit and clamping devices are ordered separately.
Unitom-5
Automatic Cut-off machine.
Automatic feeding with electronic control of feed speed.
4.7 kW (6.4 HP) motor. For 350 mm cut-off wheels. With recirculating
cooling unit (capacity 65 l) and two cutting tables with 10 mm T-slots.
Table unit and clamping devices are ordered separately.
Unitom-50
Automatic Cut-off machine with ExciCut. Automatic feeding with
electronic control of feed speed. 4.7 kW (6.4 HP) motor.
For 350 mm cut-off wheels. With recirculating cooling unit (capacity 65 l)
and two cutting tables with 10 mm T-slots.
Table unit and clamping devices are ordered separately.
Accessorie
Automatic Cutting Table (for Unitom-5)
Motorized table for cutting plane parallel sections.
Positions the workpiece at a right angle to the cut-off wheel.
The table is controlled through Unitom-5
Table Unit
For support of Unitom-machines. With compartment for recirculation
cooling unit. Width: 900 mm, depth: 750 mm, height 800 mm.
When recirculation cooling unit is used, an optional rolling pallet
(TREJU) is ordered separately
Rolling Pallet
For Unitom recirculation cooling unit
Cutting table for 10 mm T-slots (for Unitom-2/-5)
Additional table for support of large workpieces. With exchangeable
stainless steel bands. 140 x 315 mm (5.5" x 12.4")
Replacement Stainless Steel Bands
For Cutting Table with 10 mm T-slots (UNIFT) and Automatic Cutting
Table (UNIEL). Set of three
Quick-clamping Device for 10 mm T-slots, Left
For securing the workpiece. Complete with back stop. To be mounted
on a cutting table placed at the left hand side of the cut-off wheel.
Quick-clamping Device for 10 mm T-slots, Right
For securing the workpiece. Complete with back stop. To be mounted
on a cutting table placed at the right hand side of the cut-off wheel.
Vertical Clamping System for 10 mm T-slots
For clamping irregularly shaped workpieces.
Clamping height adjustable up to 58 mm.
Complete with operating key and one fl at swivel shoe.
Riser Block for 10 mm T-slots
For elevating Vertical Clamping System (TREVS) when clamping high
workpieces. To increase clamping height by 60 mm.
Swivel Shoes for Vertical Clamping System
Set of 4 multi-shaped swivel shoes for (TREVS).
Rubber Curtains
To be mounted on Unitom machines for cutting of long,
protruding workpieces. Set of two
Flange Set, 119 mm dia.
Alternative to 100 mm standard fl ange. For use with 350 mm cut-off wheels
on Unitom cut-off machines.
Struers' products are subject to constant product development. Therefore, we reserve the right
to introduce changes in our products without prior notice.
Code
UNIW2
UNIW5
UNIWL
Code
UNIEL
LABUL
TREJU
UNIFT
UNIBA
UNILE
UNIRI
TREVS
TREKS
TREVI
UNIRU
UNIFL
Struers A/S
Pederstrupvej 84
DK-2750 Ballerup, Denmark
Phone +45 44 600 800
Fax +45 44 600 801
struers@struers.dk
www.struers.com
DEUTSCHLAND
Struers GmbH
Karl-Arnold-Strasse 13 B
D- 47877 Willich
Telefon +49(02154) 486-0
e-mail: verkauf.struers@struers.de
ÖSTERREICH
Struers GmbH
Zweigniederlassung Österreich
Ginzkeyplatz 10
A-5020 Salzburg
Telefon +43 662 625 711
e-mail: stefan.lintschinger@struers.de
SCHWEIZ
Struers GmbH
Zweigniederlassung Schweiz
Weissenbrunnenstrasse 41
CH-8903 Birmensdorf
Telefon +41 17 77 63 07
e-mail: rudolf.weber@struers.de
THE NETHERLANDS
Struers GmbH Nederland
Electraweg 5
NL-3144 CB Maassluis
Tel.: +31 (0) 10 599 72 09
e-mail: glen.van.vugt@struers.de
CZECH REPUBLIC
Struers GmbH
Ocelá ská 799
CZ-190 00 Praha 9
Tel. +420 2 84 818 227
e-mail: david.cernicky@struers.de
POLAND
Struers Sp. z o.o.
Oddział w Polsce
ul. Lirowa 27
PL-02-387 Warszawa
Tel.: +48 22 824 52 80
e-mail: grzegorz.uszynski@struers.de
HUNGARY
Struers GmbH
Magyarországi fi óktelep
Puskás Tivadar u. 4
H-2040 Budaörs
Phone +36 (23) 428-742
Fax +36 (23) 428-741
e-mail: zoltan.kiss@struers.de
FRANCE
Struers S.A.S.
370, rue du Marché Rollay
F- 94507 Champigny
sur Marne Cedex
Téléphone +33 1 5509 1430
e-mail: struers@struers.fr
BELGIQUE
Struers S.A.S.
370, rue du Marché Rollay
F- 94507 Champigny
sur Marne Cedex
Téléphone +33 1 5509 1430
e-mail: struers@struers.fr
JAPAN
Marumoto Struers K.K.
Takara 3rd Building
18-6, Higashi Ueno 1-chome
Taito-ku, Tokyo 110-0015,
Phone: +81 3 5688 2914
e-mail: struers@struers.co.jp
SINGAPORE
Struers A/S
10 Eunos Road 8, #12-06 North Lobby
Singapore Post Centre
Singapore 408600
Phone +65 6299 2268
e-mail: struers.sg@struers.dk
UNITED KINGDOM
Struers Ltd.
Erskine Ferry Road, Old Kilpatrick
Glasgow, G60 5EU
Phone +44 1389 877 222
e-mail: info@struers.co.uk
USA and CANADA
Struers Inc.
24766 Detroit Road
Westlake, OH 44145-1598
Phone +1 440 871 0071
e-mail: info@struers.com
12.04 / 62110531
Printed in Denmark by Vang Rasmussen - 37