Struers Unitom-50 Manuel D'instructions page 21

Stopping the Cutting
AutoStop
Stop Position
o
STOP Key
Unitom-50
Instruction Manual
Unitom-50 automatically stops cutting when the workpiece has
been cut through (default setting). The cut-off wheel moves to
start position (default setting). The cut-off wheel stops rotating
and the cooling water stops.
To be used if you want to stop the cutting at a certain depth
(please see Advanced Operations, for further information).
The cutting process can be stopped at any time by pressing the
o
STOP key. The cut-off wheel moves to its start position
(default setting). The cut-off wheel stops rotating and the cooling
water stops.
17