Publicité
Les langues disponibles
Les langues disponibles
A
B
C
A Power Button
Press and hold for three seconds to Power On
the unit. This will begin the automatic start-up
cycle. Press and hold this button for 3 seconds to
Power-down the unit, activating the automatic
cool-down cycle. A blue light will turn on behind
the Power Button when connected to a power
source and when the unit is on.
B Control Knob
The Controller Knob is used to navigate, increase,
decrease, select, and set values. The Controller
Knob can move like a joystick or rotate to adjust
values on the Main Screen. In subscreens rotate the
wheel or use the joystick to scroll through options.
Push the Controller Knob to confirm the chosen
value or selection. The selection will blink blue
where the control knob is currently located until a
selection is made. It will be highlighted white once
the selection is confirmed.
C
Meat Probe Connection Ports
The left probe port is P1 and the right is P2.
D Set Temperature
The Set Temperature will be updated after the
temperature is modified under the Actual Tem-
perature.
E
Actual Temperature
The Actual temperature is constantly displayed.
The temperature readout is taken by the grill
probe (sensor) from the inside of the grill barrel.
Move the Control Knob over the temperature and
rotate the knob to adjust the Set Temperature.
Press the Control Knob to confirm the selection.
F
Pellet Icon
The PELLET error screen will appear if there is an
error, the fire in the Burn Pot has gone out or the
hopper may be empty. See the section on trouble-
shooting for assistance.
WWW.PITBOSS-GRILLS.COM
CONTROL BOARD
G
F
E
D
G Auger Icon
The AUGER icon is visible when the auger is in
operating correctly. If an error occurs with the
auger, the AUGER error screen will appear. See the
section on troubleshooting for assistance.
H Igniter Icon
The IGNITER icon is visible when the igniter is in
operating correctly. If an error occurs with the
igniter, the IGNITER error screen will appear. See
the section on troubleshooting for assistance.
I
Fan Icon
The FAN icon is visible when the fan is in
operating correctly. If an error occurs with the
fan, the FAN error screen will appear. See the
section on troubleshooting for assistance.
J
Wi-Fi® Icon
The Wi-Fi® icon is visible when the unit is connect-
ed to the Pit Boss Grills application. It will blink
when it is not connected.
7
H
I
J
K
L
M
PIT BOSS® GRILLS
Publicité
