Publicité
Les langues disponibles
Les langues disponibles
The Grill Probe measures the internal temperature of the grill. When
the Target temperature is adjusted, the Grill Probe will read the Actual
temperature inside the grill barrel and adjust to the desired Target
temperature. To adjust the desired Target temperature of the grill,
follow the steps below:
1.
Press the Controller Knob or touch the Actual Temperature on the
screen. The Target temperature will blink to show it is active. (A)
2.
Turn the Controller Knob to change the Target temperature value
to your desired temperature. Once the desired Target temperature
is reached, lock it in by pressing the Controller Knob or touching
the Actual Temperature. (B)
A meat probes measures the internal temperature of the meat on the grill, similar to your indoor oven. Insert the
stainless-steel meat probe into the thickest portion of the meat. The internal temperature of the meat is shown on the
display screen. Plug-in the Meat Probe adapter to the meat probe connection port and ensure it is inserted all the way
into the plug. You will feel and hear it snap in place.
IMPORTANT: When placing the meat probe into your meat, ensure the meat probe and meat probe wires avoid
direct contact with flame or excess heat. This can result in damage to your meat probe. Run the excess wire out
the rear exhaust holes of the Main Barrel, the top of the Main Barrel (near the grill lid hinge), or through the
front hole near the hopper. When not in use, disconnect from the meat probe connection port, and place in the
holes on the hopper handle to keep protected and clean.
SETTING/PROGRAMMING A MEAT PROBE SET TEMPERATURE
To program the desired Set temperature of the a Meat Probe, follow the steps below:
1.
Plug-in the adapter end of a meat probe into a connection port on the Controller.
2.
Move the Controller Knob over the Meat Probes and press the Controller Knob up or down to access the Probes sub-
screen. You can also rotate the Controller Knob and press to select at this state or continue.
3.
Choose a desired cooking temperature by selecting a protein presets, or rotate the Controller Knob to directly select
the desired Set temperature. The temperature readout will blink blue while being modified.
4.
Once the desired Set temperature of your selected Meat Probe is reached, press the Controller Knob to confirm.
IMPORTANT: P1 is a programmable meat probe with Controller control. Not only will it cook the meat to your
desired temperature, but once P1 reaches the Set temperature, a beep will sound and a bell icon will appear.
P2 is programmable meat probe as well. Once P2 reaches the Set temperature, a beep will sound and a bell icon
will appear.
PIT BOSS® GRILLS
SETTING THE TEMPERATURE
USING A MEAT PROBE
10
B
A
WWW.PITBOSS-GRILLS.COM
Publicité
