Publicité
Les langues disponibles
Les langues disponibles
24 progress
CLOCK FUNCTIONS
Electronic programmer
1
6
Clock function
Time of day
Minute Minder
Duration
End
You can use Duration
at the same time to set the time when
the appliance must be activated and
then deactivated. First set Duration
then End
.
Setting the clock functions
1. For Duration
oven function and temperature. This is
not necessary for the Minute Minder
.
2. Press the Selection button again and
again until the indicator for the neces-
sary clock function flashes.
2
3
5
4
To set, change or check the time of day.
To set a countdown time. This function has no effect on the opera-
tion of the oven.
To set how long the appliance must operate.
To set when the appliance must be deactivated.
and End
and End
, set an
Function indicators
1
Time display
2
Function indicators
3
Button +
4
Selection button
5
Button -
6
Application
3. Press + or - to set the time for the nec-
essary clock function.
The display shows the indicator for the
clock function you set. When the set
,
time ends, the indicator flashes and an
acoustic signal sounds for two minutes.
With the Duration
tions, the appliance deactivates auto-
matically.
4. Press a button to stop the signal.
5. Turn the knob for the oven functions
and the knob for the temperature to the
off position.
Cancelling the clock functions
1. Press the Selection button again and
again until the necessary function indi-
cator flashes.
2. Press and hold the button -.
The clock function goes out after some
seconds.
and End
func-
Publicité
