Electrical Connection; Wiring Diagram - Anselmo Cola TOPFIRE 70 SLIM Manuel D'installation, D'utilisation Et D'entretien

2.6 Electrical connection

Connect the power cable to a wall outlet for easy access, otherwise, install a wall switch to allow easy electrical
disconnection for all the necessary insert operations: periodic maintenance, resetting the safety devices, etc.
The voltage supplied by the system must match that specified on the stove data plate and in the technical data
section of this manual.
During insert idle periods it is advisable to unplug the power cable.
- Make sure the electrical system is equipped with a ground and differential switch
in accordance with the current Regulations.
- Position the power cable without it touching the hot parts of the insert.
- Do not pull, detach or twist the electric cables from the insert.

2.7 Wiring diagram

FUME FAN
ENCODER
AUGER
EXCHANGERS
FUME FAN VENTILATORE
FUMI
TSP= PELLET SAFETY THERMOSTAT
DEP = PRESSURE SWITCH
* = OPTIONAL COMPONENT
2.8 Emergency
Suitable fire-prevention devices should be arranged for any eventuality.
In case of a fire, proceed as follows:
- Immediately disconnect the plug.
- Extinguish the fire using suitable fire-extinguishers.
- Call the fire department immediately.
- Do not use jets of waters to extinguish the fire.
EXTERNAL
THERMOSTAT*
FUME
PROBE
IGNITER
ROOM
PROBE*
GROUND
44
AIR FLOW METER
TOPFIRE 70 SLIM