Technical Description - Anselmo Cola TOPFIRE 70 SLIM Manuel D'installation, D'utilisation Et D'entretien

1.4 Technical description

The insert works exclusively on pellets, providing healthy and safe heat in the room. Its automatic control systems
ensure optimum heat output and complete combustion; there are also safety systems to guarantee safe operation
for the unit's parts and for the user.
When correctly installed, the unit works with any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can intervene, shutting it down.
The inserts model TOPFIRE 70 SLIM with nominal power of 8.62 kW guarantee a maximum heatable volume of 246
m3 considering a coefficient of the building's energy demand equal to 35W/m3. It can vary depending on the
insulation, type and climatic zone. For technical data, refer to the table on page 5.
PULLOUT TRAVEL APPROX. 400 mm
D
Key:
A-Air grilles
B-Power cable connection
C-Combustion air inlet diam. 50mm
D-Flue pipe connection diam. 80mm
E-Pellet hopper
TOPFIRE 70 SLIM pellet insert dimensions
36 TOPFIRE 70 SLIM