USING THE RANGE
BLUETOOTH
CONNECTIVITY
®
Your smart range is designed to provide you with
Bluetooth
®
connectivity between your appliance and
smart device. The following features require a Bluetooth
connection:
• Chef Connect
• OTR Microwave
• Vent Hood
• Kitchen Hub
• Precision Cooking
• Paragon Sous Vide Probe
• Hestan
®
Cookware
Your smart range is limited to two active Bluetooth®
connections at any given time and up to 5 devices can
be paired with the range. Due to this, your range will
automatically prioritize the devices that should remain
in connection and temporarily disconnect all other
connections. If multiple Bluetooth
active and a 3rd device is attempted to be connected, your
range will disconnect one of the active devices to open
up space for the new device connection. NOTE: Chef
Connect devices do not need to be manually reconnected.
The range will scan for known devices and re-establish the
connection on its own.
49-2001169 Rev. 2
®
®
Pairing a Bluetooth
®
Device
Press the Bluetooth
®
Connect pad on the cooktop. The
cooktop will enter Pair mode. Tap cookware or press Chef
Connect button on enabled microwave or hood device.
When connected, the cooktop will display "donE".
Supported Devices
Hestan Cue
fry pan
®
Hestan Cue
®
pot
Removing Bluetooth
®
Devices
Tap and hold the Bluetooth
for 3 seconds.
NOTE: Your unit cannot delete a single or specific device.
All of your paired devices are cleared. Devices you wish to
use must be paired again.
How to Initiate Pairing
Tap pan handle twice
Tap pot handle twice
®
Connect and All Off pads
15