Thomas AQUA FLOORCLEANER CORDLESS Mode D'emploi page 22

5. Cleaning the cleaning roller cover
It is recommended to regularly clean the cleaning roller cover after each use to
prevent dirt building up.
① Open the cover by pressing the two release buttons together with your thumb
and index finger.
② After removing the cover, rinse it with clean water and dry it.
③ Then replace the cleaning roller cover.
22
6. Cleaning the cleaning roller
It is recommended to clean and dry the cleaning roller thoroughly after each use.
Note: Place the appliance on the charging base and disconnect it from
the power supply.
① Open the cover over the cleaning roller by pressing the two release buttons
together with your thumb and index finger.
② Turn the cleaning roller release knob by 90° anticlockwise and then pull it
outwards to remove the cleaning roller.
③ Use the cleaning brush provided to remove hair or dirt from the suction
channel intake area.
④ There is a sharp blade in the handle of the cleaning brush provided that you
can use to cut hair and other dirt wrapped around the cleaning roller in order
to remove it.
⑤ Then wash the cleaning roller with clean water and leave it to air dry in the
accessory holder provided for this purpose on the charging base.