Publicité
Les langues disponibles
Les langues disponibles
④ When the appliance enters charging mode, press the self-cleaning button on
the handle to start the self-cleaning process.
⑤ After cleaning, the appliance will go back into charging mode.
1. After using the self-cleaning function, please empty the waste water
tank again.
2. If there is residual dirt on the charging base, please remove it before
self-cleaning.
2. Maintenance
① Regularly clean the outer body of the appliance with a soft, damp cloth. Do
not use a scouring pad or an abrasive detergent to clean the outer body, as
this may cause scratches on the surface.
② To prevent hazards, you must never immerse the body of the appliance in
water or any other liquid, nor rinse it under the tap.
③ Check the cleaning roller regularly.
④ Regularly check the power adapter to ensure the power cord is intact and
safe to use.
3. Clean the clean water tank
We strongly advise you to empty the clean water tank before storing the appliance
away.
For further information on how to remove and insert the clean water tank, see
the "Getting Started/3. Filling the clean water tank" section. When they have
been removed, the clean water tank and lid can be rinsed under running water.
1. Allow the parts to dry thoroughly afterwards.
2. Make sure that the electrical contacts are protected from moisture
during rinsing.
4. Clean the waste water tank
Information about removing and inserting the waste water tank can be found in
the "Operation/4. 'Waste water tank' display indicator flashes" section.
4.1 Cleaning the upper cover of the waste water tank
① If the filter in the waste water tank is dirty, please clean it in good time.
② Remove the upper cover of the waste water tank and rinse the cover, including
the filter, with clean water.
③ After cleaning, replace the cover on the waste water tank.
1. Clean the waste water tank after each use to prevent the growth of
fungi and bacteria. Allow the parts to dry thoroughly afterwards.
2. Make sure that the electrical contacts are protected from moisture
during rinsing.
4.2 Cleaning the filter
① First, remove the filter from the waste water tank cover.
② After removing it, wash it with clean water and leave it to dry thoroughly
before replacing it in the waste water tank.
21
Publicité
