Télécharger Imprimer la page

Olimpia splendid NEXYA S5 E Serie Mode D'emploi Et D'entretien page 93

Masquer les pouces Voir aussi pour NEXYA S5 E Serie:

Publicité

8.3.1 - Indicators on remote controller (fig. 18)
A. Transmission
This transmission indicator lights when remote controller transmits signals to the indoor unit.
B. Operating mode
Displays the operating mode active.
It includes: AUTO
C. Follow me Function
D. Temperature
Displays the required temperature (from 17°C to 30°C).
When you set the operating mode to FAN ONLY, no temperature setting is displayed.
E. Timer
Indicate Timer on/off time (0÷23:50 hours).
F. Fan speed
Displays the fan speed set, AUTO and three speed levels can be indicated
"
" (LOW) - "
"AUTO" is displayed when the operational mode is "AUTO" or "DRY".
G. Sleep
Displayed under sleeping operation.
Press the SLEEP button again to remove.
The remote control display is illustrated just for greater clarity.
8.3.2 - Description of the remote control keys (figure 19)
1. MODE SELECTION key
Every time this key is pressed, a mode is selected in sequence,
AUTO > COOL DRY > HEAT > FAN and then back to AUTO.
2. ON/OFF key
Press this key to start the appliance and press it again to stop the appliance.
3. SWING/DIRECT key
Press the SWING key to activate/deactivate operation of the vertical openings.
Press the DIRECT key to activate/deactivate operation of the horizontal openings (not available for this
model).
4. TEMP/TIME key
Press the
key to increase the indoor temperature set or to adjust the TIMER in a clockwise direction.
Press the
key to lower the indoor temperature set or to adjust the TIMER in an anti-clockwise direction.
5. FAN key
Used to select fan speed, it has four levels AUTO, LOW, MED or HIGH.
The fan speed changes every time this key is pressed.
6. TURBO/SELF CLEAN key
Press the left part of this key to activate the TURBO function.
Press the right part of this key to activate the SELF CLEAN function.
10.SLEEP/FRESH key
Press the key (10) to activate/deactivate the SLEEP function.
11.LED/FOLLOW ME key
Press the left part of this key to activate/deactivate the internal display.
Press the right part of this key to start the FOLLOW ME function.
, COOL
, DRY
, HEAT
" (MED) - "
" (HIGH).
, FAN ONLY
and return to AUTO
.
EN - 37
NEXYA S5 E

Publicité

loading

Ce manuel est également adapté pour:

Nexya s5 e dualNexya s5 e trialNexya s5 e quadriNexya s5 e penta