1.2 -
MATERIAL NECESSARY NOT SUPPLIED
For correct installation of the appliance, components that have not been supplied must be used.
a. Connection pipes unit (water side)
b. Connection pipes unit (gas side)
c. Magnetic ring
1.3 -
ACCESSORIES
An incorrect installation may cause water leakage, electric shocks and fire, or cause a mal-
function of the equipment.
Name of
Accessories
Installation plate (some
models)
Plastic expansion sheath
(depend-
(some models)
models)
Self-Tapping Screw A
(depend-
(some models)
models)
Optional
part (one
Transfer connector
piece/ one
(packed with the indoor or
outdoor unit, depending on
models)
NOTE: Pipe size may differ
Optional
from appliance to appliance.
part (1-5
To meet different pipe size
pieces for
requirements, sometimes
the pipe connections need
a transfer connector installed
depending
on the outdoor unit.
on mod-
OPTIONAL
Name
Connecting pipe assembly.
1.4 - STORAGE
Store the cartons in a closed environment protected against atmospheric agents and raised off the floor by
planks or a pallet.
TO NOT TURN THE CARTON UPSIDE DOWN.
Q'ty
Shape
(pc)
1
5-8
ing on
5-8
ing on
indoor
unit)
outdoor
unit,
els)
Liquid side
Gas side
Name of
Accessories
Drain joint (some models)
Seal ring (some models)
Magnetic ring (Hitch it on the
connective cable between
indoor unit and outdoor unit
after installation.)
(some models)
Cord protection rubber
ring
(If the cord clamp cannot fas-
ten on a small cord, use the
cord protection rubber ring
[supplied with accessories]
to wrap around the cord.
Then fix it in place with the
cord clamp.)
(some models)
Forma
Ø6.35 (1/4 in)
Ø9,52 (3/8 in)
Ø9,52 (3/8 in)
Ø12.7 (1/2 in)
Ø 16 (5/8 in)
Q'ty
Shape
(pc)
1
1
Varies
by model
1
Quantità (PC)
Parts you must purchase separate.
EN - 11
NEXYA S5 E