Publicité
Les langues disponibles
Les langues disponibles
Safety instructions
Important general safety instructions
This product is only intended to be used for the purpose it was designed. Any other use is therefore improper and dangerous. The manu-
facturer is not liable for any damage caused by improper, wrongful or unreasonable use.
Stay away from working mechancal parts. Stay out of the working range of the moving operator.
Do not oppose the movement of the operator as this may result in danger.
Do not allow children to play to loiter within the working range of the operator. Keep transitters and any other command devices away from
children, to prevent the operator from being activated y mistake.
Immediately stop using the operator if any anomaly is manifested.
Danger of hand crushing
Maintenance
Periodic maintenance
Periodic maintenance jobs to be done by end-users are wiping clean the photo-
cell's glass front pieces and checking for proper working state of safety devices and that the
operator is free of any obstacles.
We also suggest to periodically check the state of lubrication and tightness of screws on the
operator.
To check the efficiency of the safety devices, wave an object in front of the photocells during
closing cycle, if the operator inverts or halts its movement, the photocells are working pro-
perly. This is the only maintenance job that can be done with the spring-tension of the barrier
loaded.
Before performing any job we highly recommend to cut off the main power, to prevent any
dangerous situations from possible accidental movements by the barrier.
-To wipe clean the photocell glass, use a slightly damp cloth, and do not use any solvents or
other chemical products that may ruin the device.
- Check that the photocells are free of any vegetaion blocking them, and that there are no
obstacles to the free movement of the arm.
CA
M E
Danger high voltage
Transit forbidden during
operation
Publicité
