Publicité
Les langues disponibles
Les langues disponibles
Connecting two coupled barriers
You need to determine which barrier will be the Master and which
the Slavebecausebecause:
- on barrierSlaveonly
connect the main
power (terminals L-N)
and any pertinentn
warning devices (termi-
nals 10-E); also, set Dip
switch 7 to ON, adjust
the travel and decele-
ration speeds as on the
Master barrier.
At the end, connect the two cards together using the terminals RX-TX-GND.
Black
COMMAND CARD MA-
COMMAND CARD
Screened cable
2402C 22AWG
Red
COMMAND CARD MASTER
DX
STER
SLAVE
7 ON
Black
Red
COMMAND CARD
SX
- sulla barriera Master
perform all connec-
tions, settings and
adjustments needed
for the installation;
also, activate the
remote control on this
barrier.
SLAVE
Publicité
