CAME G6501 Manuel D'installation page 32

Legend of symbols
This symbol means parts must be read carefully.
This symbol means the parts descibe safety issues.
This symbol tells you what to notify to the user.
Intended use and limits to use
Intended use
The 001G6500 automatic barrier is designed and built by CAME S.p.A. in compliance with current safety regulations for use in private or
public parking facilities and in residential and high-desnity fl ow areas.
Every installation and use other than that specifi ed in this manual is forbidden.
Limits to use
Passage width up to 6.50 metres with 4 to 8 seconds opening time.
Description
The cabinet is made of 2 mm-thick galvanised steel sheeting and varnished with epoxy powders. Features to complement with dedicated
Came accessories.
The anchoring base is made of galvanised steel and has four clamps with securing nuts. The arm-attachment flange makes for quick and
safe blocking of the arm. Inside there are: control panel, mechanical safety stops, endstop assembly, balancing spring and irreversible
gearmotor with die-cast aluminium case. The gearmotor features an endless screw based reduction system which is lubricated by per-
manent fluid grease with rotating parts on lubricated bearings.
There are two versions of the GARD model:
001G6500 - Barrier made of varnished galvanised steel ready-to-fit accessories.
001G6501 - Barrier made of satin-finish stainless steel ready-to-fit accessories.
NB - You must request right or left-side barriers when ordering. In this manual only left-hand barriers are shown.
Required accessories:
001G06850 - White varnished tubular aluminium barrier armØ 100 x 6,850 mm complete with raceway profile cover;
001G0602 - White painted tubular aluminium boom Ø 100 mm L = 6850 mm;
001G02040 - Balancing spring Ø 40 (yellow);
001G04060 - Balancing spring Ø 50 (green);
001G06080 - Balancing spring Ø 55 (red);
Optional accessories:
For barrier arm 001G06850:
001G06802 - Reinforcement for boom
001G028401 - Luminous cord;
001G028402 - Cable for connecting luminous cord;
002LB38 - Card for connecting n. 3 12 V – 7 Ah emergency batteries;
001G02807 - Fixed support for barrier arm;
001G02808 - Swing leg support;
001G0468 - Support for applying DELTA-I and DELTA-SI photocells;
001G04601 - Adaptor for Kiaro series Flashing light applicationo (with 001KIAROS support);
001G0465 - Aluminium skirt (2 m modules);
001G02809 - Red reflective adhesive strips (20 piece package);
WARNINGS!
001G02808 For passage widths of max 6 m.
001G02807 For passage widths of over 6 m the swing-leg is mandatory .
001G0465 - 001G02808 cannot be used together.
Important! Check that the command, safety equipment and accessories are CAME originals; this will ensure easy installation and main-
tenance of your system.