Publicité
Les langues disponibles
Les langues disponibles
Installing the operator
Warning: the barrier must be mounted by at least two persons. Use proper hoisting equipemnt to transport and position the
barrier.
During mounting phase, the barrier may be unstable. Do rest against barrier until fully mounted, to avoid any tumbling over.
Insert the customised key into the lock and turn it counterclockwise. Remove the inspection hatch from the cabinet.
Position the cabinet to the anchoring base and secure it using the washers and nuts.
Note: install the cabinet with the inspection door facing an easily accessible direction.
To change rotation at a later date, request documentation from authorised dealer or directly contact the Came office near you (see
last page or www.came.com)
Entrance side
Left barrier
Internal zone
2
1
Nut UNI 5588
M12
Washer
Entrance side
RIGHT
barrier
Internal zone
Publicité
