Maintenance Schedule; Engine; Alternator - SDMO RL6-1b Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

8. Maintenance schedule

8.1. Engine

Maintenance:
Operation
Check the oil level (top up if
necessary)
Check the coolant level (top
up if necessary)
Check the air filter
Check the pipes for leaks
Check the radiator
exchange surface
Change the engine oil (1)
Replace the oil filter
Replace the fuel filter
Check the condition of the
hoses
Check the condition and
tension of the belt
Replace the alternator belt
Replace the coolant
(1): the oil drainage point is located on the crankcase.
Note: if the fuel needs to be drained, the generating set can be accessed from underneath while mounted on the trailer.
Special maintenance (*) :
Operation
Adjust the rocker lever
valve clearance
Clean the fuel tank
Calibrate and clean the
injector
Clean the inside of the
radiator
Replace the fuel hoses
Replace the timing belt
Carry out a partial service
Carry out the general
service
( * ): these operations must be carried out by one of our agents.

8.2. Alternator

After 20 hours' operation, check the tightness of all the mounting screws, the general condition of the machine and the installation's
various electrical connections.
Every
Every 10
After 50
hours
hours
hours
Every 500
Every 1000
hours
hours
68/372
Every
Every
125
250
500
hours
hours
After 4000
After 5000
hours
hours
Every
1000
hours or
2 years
After 10000
hours

Publicité

Table des Matières
loading

Table des Matières