Maintenance Schedule; Maintenance Procedures - SDMO SD 6000 TE-2 Manuel D'utilisation Et D'entretien

6. Maintenance schedule

6.1. Reminder of use
The maintenance interval frequency and the operations to be carried out are outlined in the maintenance programme.
However, it should be added that it is the environment in which the generating set is operating which determines this programme.
Accordingly, if the set is used in extreme conditions, shorter intervals between maintenance procedures should be adopted.
These maintenance schedules apply only to generating sets running on fuel and oil, that conform to the specifications given in this
booklet.

6.2. Maintenance procedures

Carry out these maintenance procedures
at whichever of the two intervals is
Part
Engine oil
Oil filter
Air filter
Fuel filter
Cleaning the generating set
Valve clearance
Injection system
(1) This operation should be carried out by one of our agents
Each time it is
reached first
Check the level
Change
Clean
Check
Replace
Replace
Check / adjust
Check
After the first
used 50 hours of
use
•
•
•
•
•
Every 3 Every 6
months or months or
200 hours 400 hours
•
•
•
•
•
•
• (1)
Every 12
months or
1000
hours
• (1)