Transmission
window
Fi!
About 7 meters (23 feet) in
front
of the signal
sensor.
{The actual range will depend
on the angle
at which
the
remote control is used.)
Concerning the remote control
A
Battery installation
Use of batteries
e Align the poles (+ and -) properly when inserting the batteries.
Press in and down towards the minus end.
® Do not mix old and new batteries or different types of batteries.
e Do not recharge ordinary dry cell batteries.
® Do not heat or disassemble the batteries. Do not allow them to
contact flame or water.
è Remove the batteries if the unit is not to be used for a long time.
è Do not keep together with metallic objects such as necklaces.
e Do not use rechargeable type batteries.
è Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes
in contact with
any part of your body.
B
Correct method of use
Operation notes
e Do
not place
obstacles
between
the
remote
control
signal
sensor and remote control unit.
Do
not expose
the
remote
control
signal sensor
to direct
sunlight or to the bright light of a fluorescent light.
è Take care to keep the remote control signal sensor and end of
the remote control unit free from dust.
$ if the unit is installed in a rack with glass doors, the glass doors'
thickness or color might make it necessary to use the remote
control a shorter distance from the unit.
To prevent damage
e Never place heavy items on top of the unit.
e Do not disassemble or reconstruct the unit.
è Do not spill water or other liquids into the unit.
E Befo
use
ROT5307