Panasonic SC-HT280 Instructions D'utilisation page 39

| Reference for speakers |
4 When "SIZE" is selected |
(D Press [B] to select the speaker
channel to be set.
Each time the button is pressed the display switches as
follows.
FRONT — CENTER —~ SURROUND
ee eee
=
a # — 2 2 © Turn [SFC MODE] to set the type
toa! je |
(LARGE, SMALL) and presence
(NONE) of the speaker.
Each time the selector is turned the display switches as
follows.
Front:
SMALL =—* LARGE
Center, Surround:
NONE s— SMALL =— LARGE
Select "NONE" if a center and surround speaker isn't
"SIZE" | connected.
(T) aspeaxerse ee eee ee ee ee @ Repeat steps (D and © to
EE Ie complete the size settings for the
ER NAME = front, center and surround
speakers.
2). ee When "DISTANCE?" is selected
= (D Press [B] to select the speaker
O LULI channel to be set.
Each time the button is pressed the display switches as
follows.
FRONT -—+ CENTER ——> SURROUND
"DISTANCE" a ree
OK =S a @) Turn [SFC MODE] to set the
i Lit ini P
Distance can be set at 1 foot intervals between 3 feet
to 30 feet.
The factory settings are as follows.
(2) SFC MODE Front and center speakers: 10 FEET
Surround speakers: 5 FEET
= - Arl EELT @ Repeat steps (D and @ to complete
E S the distance settings for the front,
center and surround speakers.
Lo SETTING
When "FILTER" is selected
Turn [SFC MODE] to set the cut off
frequency.
NET Each time the selector is turned the display switches as
I LILI follows.
100 === 150 == 200
5 Press [A] and [B] at the same time.
peel rapt "COMPLETE" appears on the display.
ea Fi na T aI H — lf you allow about 10 seconds to elapse between settings, the
Eire E a — MORE ... CEE procedure is cancelled, all settings are returned to how they were,
and the previous display is restored. Begin again if this occurs.
"FILTER"
SFC MODE
7 Ref
For your reference:
The settings remain as they are until changed by the above
procedure, even after the power has been turned off.
AQT5307