Publicité
Les langues disponibles
Les langues disponibles
4
Connecting the speakers to the receiver
|
|
Speaker cords
Rear of receiver
e Connect
the cords so the numbers
on the stickers
match the numbers under the terminals.
e Connect the red cords to the red terminals {+} and the
black cords to the black terminals (—).
è Ensure the wire of the cords are fully inserted so they
do not touch each other and short circuit.
SPEAKERS
SUB
CENTER
SURROUND
WOOFER
FRONT
After you have completed set-up and connection, wind the excess
:
i
cord and keep together with string.
Connect so the numbers on the stickers
match the numbers under the terminals.
Attaching to a wall
To attach vertically
To attach horizontally
Rubber teet
Screw
(included)
{not included)
Screw
30-35 mm
|
4
(1-3/16" to 1-3/8"}
(not inctuded)
Y
L
Rubber feet
T #7.5-9.5 mm
106 mm
(included)
J
(4-11/64")
È
des
7-9 mm
<
{9/32" to 23/64")
30-35 mm
(1-3/16" to 1-3/8")
Rubber feet
(included)
g Con
Screw
T #7.5-9.5mm
{not included}
vd
7-9 mm
Attach four rubber feet to each speaker, ensuring they do not cover the holes. Screw the wood screw into a thick and hard part of the wall.
The surface you attach the speakers to must be able to support over 10 kg (22 Ib). Consult your dealer for detail.
Attaching to speaker stands
`
Moving the brand plate
Ensure the following 'conditions are met when you purchase
You can turn the brand plate if you want to set up the smail
your speaker stands.
speakers laying on their sides.
® Screw; diameter: 5 mm, pitch: 0.8 mm,
length: thickness of
Ensure the plate doesn't get caught on the net when you turn it.
stand plate plus between 7 and 10 mm.
Distance between the centers of the holes; 60 mm
è The stands must be able to support over 10 kg (22 Ib).
è The stands must be stable even if the speakers are in a high
position.
5 mm, Pitch 0.8 mm
=>
Panasonic
60 mm
(2-23/64")
Panasonic
Caution
Use
the
speakers
only
with
the
recommended system. Failure to do so may
lead to damage to the amplifier and/or the
speakers, and may result in the risk of fire.
Consult
a
qualified
service
person
if
damage has occurred or if you experience
a sudden change in performance.
@ Do not attempt to attach these speakers to
walls
using
methods
other
than
those
15
(not included)
described in this manual.
with these holes.
+7 to 10mm
{9/32*-25/64")
Speaker stands
RQT5307
Publicité
