Publicité
Les langues disponibles
Les langues disponibles
—
se ——
e
————
BO
Of
j
Fe
ms fa
TAPE MONITOR
1
INPUT SELECTOR
(O)
TAPE MONITOR
|
INPUT SELECTOR
(O)
|
Making a recording
|
e You
cannot
record
a source
connected
through
a digital
terminal.
e When
recording
CD,
DVD,
or TV, ensure
the source
is
connected
through
the corresponding
analog
terminals
(=)
pages 10-11) and "ANALOG" input is selected {> page 20).
A
Recording on a tape deck
Before recording, prepare the tape deck.
See the tape deck's operating instructions for details.
À Turn [INPUT SELECTOR] to select the
source to be recorded.
Any source can be selected except TAPE.
2
Begin recording on the tape deck.
Follow your tape deck's operating instructions.
3
Begin the source to be recorded.
Follow your equipment's operating instructions.
B
To monitor the recorded sound
It is possible to check the sound being recorded if your tape deck
is a 3 head system.
Press [TAPE MONITOR] on this unit and
set the monitor button on the tape deck to
"TAPE".
Press [TAPE MONITOR] once again to turn it off.
Recording on a VCR
Before recording, prepare the VCR.
See the VCR's operating instructions for details.
'| Turn [INPUT SELECTOR] to select the
source to be recorded.
Any source can be selected except VCR and TAPE.
Recording from the tape deck is not possible.
Ņ
Begin recording on the VCR.
Follow your VCR's operating instructions.
CS
Begin the source to be recorded.
Follow your equipment's operating instructions.
| Oth
29
RQTS307
Publicité
