Publicité
Les langues disponibles
Les langues disponibles
|
To watch TV broadcasts
The procedures below are examples for when a TV and VCR are connected to the receiver as shown in this manual.
This remote control transmitter is designed for use with a home theater system. It you press [TV] (or [VCR]) and (d] in succession, the TV
(or VCR) and receiver will be turned on and the selector on the receiver will change to TV (or VCR). Press [ À ] within 3 seconds of pressing
[TV] (or [VCR]}.
= Co €
". a
&
IG,
SOS 2
(CD
DELAY DO
228
eee
To watch TV broadcasts
Point the remote
Point the remote
Point the remote control.
control toward the
control toward
toward the TV
TV and the receiver
the TV
TVANIDEO
Switch ON the TV
Set the TV/VIDEO
and the receiver.
mode
on the TV'
;
pini
Select the desired channel.
to
"TV".
The receiver will
switch to TV input.
If you allow more than 3 seconds to pass between pressing [TV] and [0 ]; only the TV will be
operated.
Do not use this remote control to turn the TV ON and OFF if you are not using the receiver.
To watch TV broadcasts with a VCR tuner
Point the remote
Point the remote control
control toward the TV
toward the VCR and
`
and the receiver
the receiver
Set the input
VCR
selector on
Ty
o
O»
O
»
©
we
©
EÐ the VCR to
the "TUNER"
The
receiver will switch
to VCR input.
Point the remote control toward the VCR
|
Point
the
remote
control
toward the TV
TVAVIDEO
<=
Set the TV/VIDEO
mode on the TV
Select the desired channel.
to "VIDEO".
E Rem
con
If you allow more than 3 seconds to pass between pressing [VCR] and [ O ], only the VCR will be
operated.
Do not use this remote control to turn the VCR ON and OFF if you are not using the receiver.
To switch OFF the TV
TV
ò
Com O
To switch Orr the VCR
VOR
[Note |
|
C)
a
CD
Turn the receiver OFF last.
This button is used when using ENTER to select a channel on a TV or VCR
which has not been manufactured by this company.
ROT5307
Publicité
