Publicité
Les langues disponibles
Les langues disponibles
Direct tuning
|
The radio
|
|
by remote control only
Specify the frequency using the numbered buttons on the remote
control to directly tune to the station.
À
Press [TUNER/BAND].
This will set the remote control to operate the tuner.
The selector on the receiver will change to "TUNER".
Each time the button is pressed, the band will change as
follows,
FM:
AM.
N
Press [DIRECT TUNING/DISC ENTER].
While cursor display is flashing (approx. 10 seconds)
Press the numbered buttons to enter
(es)
1
the frequency.
"BAND.
=
PONS
es
7
Tuning interval FM: 0.1 MHz
_ tna
LT
iI
i}
AM: 10 kHz
1,11
Li
II
tim,
If the desired FM frequency is 107.9 MHz, press
|
O0
:
If the frequency
has been
input correctly, the displayed
Selected band
frequency will blink once.
2 DIRECT TUNING!
1. If no button is pressed while the cursor display is flashing,
DISC ENTER
=
`
the display will return to the frequency which is currently
being received.
To re-specify the frequency, repeat.the procedure from
step 2.
2. lif the frequency has not been input correctly, "ERROR"
will be displayed.
In this case, re-enter the frequency.
dio
fun
Br
TUNED
STEREO
=
=SPEAKERS=
i
AA
La]
fo 11
RQT5307
Publicité
