Publicité
Les langues disponibles
Les langues disponibles
RQT5307
7
|
The radio
|
Preset tuning
Presetting radio stations into the memory channels of this unit
makes selecting stations simple.
A total of 30 FM and AM stations can be preset.
Please remember this
If a new station is preset into a channel, the setting for the station
which was previously entered in that channel will be automatically
erased.
Automatic memory presetting
Automatic memory presetting allows this unit to search for stations
and then preset them into memory.
1 Tune to the lowest frequency in FM.
(+ Pages 24-25.)
2 Press and hold [MEMORY].
Automatic memory presetting will start.
All the FM
stations
the unit can
receive
are preset in .
channels 1 to 30.
3
Tune to the lowest frequency in AM.
(> Pages 24-25.)
4
Press and hold [MEMORY].
Automatic memory presetting will start.
All the AM
stations
the unit can
receive
are preset
in
channels 21 to 30. (Any FM stations in these channels will
be replaced.)
During automatic memory presetting, the memory indicator
will flash while the frequency scrolls.
When a station is preset
The memory indicator and the preset channel number will
be displayed for approximately 1 second. (E)
When presetting is completed
The last broadcast station to be preset will be displayed.
Frequencies
may
not be preset correctly
in cases
where
the
broadcast waves are too strong or too weak. In such cases, carry
out presetting manually ( Page 27}.
Publicité
