Fixture Information - afx light LEDWASH-1920Z Manuel D'utilisation

Use the UP/DOWN buttons to adjust the intensity from 1 (dark) to 10 (bright). Once selected, press
the ENTER button to confirm and store. Press the MENU button to go back to the last menu or let
the unit idle one minute to exit menu mode.
TEMPERATURE UNIT
To select Temperature Unit, press the ENTER button to show TEMPERATURE UNIT on the display.
Use the UP/DOWN buttons to select °C or °F, press the ENTER button to confirm. Press the MENU
button to go back to the last menu or let the unit idle one minute to exit menu mode.

FIXTURE INFORMATION

Enter MENU mode, select Information, press the ENTER button to confirm, use the UP/DOWN but-
ton to select Fixture Hours or Version.
FIXTURE HOURS
To select Fixture use time, press the ENTER button to show the FIXTURE USE TIME on the display.
Press the ENTER button, the fixture working hours will show on the display. Press the MENU button
to exit.
VERSION
To select Firmware Version, press the ENTER button to show the FIRMWARE VERSION on the dis-
play. Press the ENTER button and the fixture software version will show on the display. Press the
MENU button to exit.
RESET FUNCTIONS
Enter MENU mode, select Reset Function, press the ENTER button to confirm, use the UP/DOWN
button to select Pan/Tilt, Zoom or All.
PAN/TILT
To Select Pan/Tilt, press the ENTER button to show the PAN/TILT on the display. Use the UP/DOWN
button to select Yes (the unit will run built-in program to reset pan and tilt to their home positions)
or No, press the ENTER button to store. Press the MENU button to exit menu mode.
ZOOM
To select Zoom, press the ENTER button to show ZOOM on the display. Use the UP/DOWN button
to select Yes (the unit will run built-in program to reset zoom to its home positions) or No, press
the ENTER button to store. Press the MENU button to exit menu mode.
Zoom 10 degree beam Angle
Distance(M) R(Lux)
3M 2670
5M 680
Zoom 60 degree beam Angle
Distance(M) R(Lux)
3M 230
5M 84
ALL
To select All, press the ENTER button to show ALL on the display. Use the UP/DOWN button to se-
lect Yes (the unit will run built-in program to reset all motors to their home positions) or No, press
ENTER button to store. Press MENU button to exit menu mode.
SPECIAL FUNCTIONS
Enter MENU mode, select Special Functions, press the ENTER button to confirm, use the UP/DOWN
button to select Fixture Maintenance or Factory Setting.
EN 8
G(Lux) B(Lux)
6420 195
1920 85
G(Lux) B(Lux)
620 32.5
220 18.5
W(Lux) Full Color(Lux)
7610 13810
2520 4650
W(Lux) Full Color(Lux)
765 1425
325 530
© Copyright LOTRONIC 2020