Display Menu; Fixture Cleaning - afx light BLADE8-FX Manuel D'utilisation

DISPLAY MENU

1 DMX ADDRESS
2 CHANNEL MODE
3 SHOW MODE
4 SLAVE MODE
5 SOUND SENSE
6 PAN INVERSE
7 TILT INVERSE
8 BACK LIGHT
9 AUTO TEST
10 FIXTURE TIME
11 FIRMWARE VERSION
12 FACTORY DEFAULTS
You will find the detailed DMX channel charts at the end of the manual.
HOW TO OPERATE MOTOR OFFSET FUNCTION :
Press "MENU" button , then press "ENTER" for 3 seconds at least. The unit will enter into Offset
Mode and "PAN Offset" is displayed. Press ENTER and then Press UP and DOWN to adjust the mo-
tor position at -127 ---- 127. Press the ENTER button again to save the PAN Fine value that you set.

FIXTURE CLEANING

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses and mirror
should be carried out periodically to optimize light output. Cleaning frequency depends on the en-
vironment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use we
recommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp out-put.
1. Use normal glass cleaner and a soft cloth to wipe down the out- side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.
5. Always be sure to dry all parts completely before plugging the unit back in.
SPECIFICATIONS
Power supply ................................................................................................................... 100-260V~ 50/60Hz
Consumption ............................................................................................................................................. 100W
Fuse ................................................................................................................................................................ F3A
Light source ................................................................................................................ 8x 12W RGBW 4in1 LED
Max. ambient temperature ........................................................................................................... -25°C - 45°C
DMX in & output .................................................................................................................................. 3-pin XLR
Dimensions ........................................................................................................................540 x 540 x 250mm
Weight ....................................................................................................................................................... 9.59kg
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre.
Ask your local authorities or your dealer about the way to proceed.
EN 4
A001---A512
16CH, 45CH
SOUND
AUTO
MASTER
SLAVE
SOUND SENSITIVITY CONTROL (0-100)
YES
NO
YES
NO
ON
OFF
AUTO TEST
FIXTURE USE TIME 0----9999
V1.04
YES
NO
© Copyright LOTRONIC 2018