Unpacking Instructions; Safety Recommendations - afx light LEDWASH-1920Z Manuel D'utilisation

UNPACKING INSTRUCTIONS

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure
that all parts are present and have been received in good condition. Notify the freight company
immediately and retain packing material for inspection if any parts appear to be damaged from
shipping or the carton itself shows signs of mishandling. Keep the carton and all packing mate-
rials. In the event that a fixture must be returned to the factory, it is important that the fixture be
returned in the original factory box and packing.
CONTENTS OF THE CARTON
• 1 pc. LEDWASH-1920Z
• 1 pc. user manual
• 1 pc. power cable
• 2 pc. omega clamps
EXPLANATION OF SYMBOLS ON THE SILKSCREEN
The triangle containing a lightning symbol is used to indicate whenever your health is at risk
(due to electrocution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the ap-
pliance.
The unit complies with CE standards
For indoor use only
Minimum distance between the appliance and other objects
0.5m
Don't stare into the light beam
DO NOT OPEN THE HOUSING
Please read this manual carefully before operating this product.

SAFETY RECOMMENDATIONS

• Please read these instructions carefully, they include important information about the installa-
tion, usage and maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that
he also receives this instruction booklet.
• Always make sure that you are connecting to the proper voltage, and that the line voltage you
are connecting to is not higher than that stated on the bottom of the fixture.
• The appliance is part of class I and must exclusively connected to an earthed mains outlet.
• This product is intended for indoor use only!
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no
flammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from
adjacent surfaces. Be sure that no ventilation slots are blocked.
• The minimum distance luminaire from that part of the luminaire or lamp to the lighted object is
0.5m.
0.5m
• The suitable ambient temperature (Ta) is between -25°C and 45°C. Don't operate the fixture at
higher or lower temperatures.
• The unit surface temperature may reach up to 75°C. DO NOT touch the housing with bare hands
during its operation. Turn off the power and allow about 15 minutes for the unit to cool down
before any maintenance.
• In the event of a serious operating problem, stop using the unit immediately. Never try to repair
EN 2
USER MANUAL
CAUTION
SHOCK HAZARD
© Copyright LOTRONIC 2020