Fixture Cleaning - afx light STROBE-FX Manuel D'utilisation

200~255
CH9 0~255
5. REMOTE CONTROLLED OPERATION
BLACK: OUT: light On / Off (return the present program)
AUTO: Press to select the automatic mode.
SOUND: Press to select the sound controlled mode.
STROBE: Press STROBE button and then + / - buttons to set the strobe speed.
SPEED: Press SPEED and then + / - buttons to set a different speed.
SENSITIVITY
To adjust sound sensitivity for in Sound-Active mode
1. Press <SENSITIVITY> on the IRC.
2. Press <+> or <–> to either increase or decrease sound sensitivity.
DMX/%
To enable DMX or disallow DMX on the product
Press <DMX> on the IRC, the product work on the DMX controlling modes.
MANUAL Mode
1. Press <MANUAL> on the IRC.
2. Press <R>, <G>, <B>, <W>, <A>, <UV> (red, green, blue .white or amber) to choose your
color.
FADE Mode
To adjust the FADE speed of the automatic program , the sound active program and the manual mode.
1. Press <FADE> on the IRC.
2. Press < FADE > again to turn off the FADE.
Number 1~9
To adjust the brightness value of the automatic program , the sound active program and Manual Mode.
1. Press digit <1> to <9> to change different brightness on the device.

6. Fixture Cleaning

The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit's optics.
• Clean with soft cloth using normal glass cleaning fluid.
• Always dry the parts carefully.
• Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling
centre. Ask your local authorities or your dealer about the way to proceed.
©Copyright LOTRONIC 2015
Sound DMX
Auto DMX Speed (From slow to fast)
STROBE-FX 5