Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Troubleshooting
OPERATION
Range does not operate.
•
Verify power is on.
•
Verify electrical power to the range and home circuit
breaker is on.
•
The oven automatically turns off after 12 hours of con-
tinual use, except in Dehydration or Sabbath mode.
Clock turns off.
•
The unit is in standby power mode. Refer to page 10
to turn standby power off.
OVEN
Oven temperature issue.
•
Contact Wolf Customer Care at 800-222-7820.
No response from the touchscreen or control panel.
•
Turn the circuit breaker off for 20 seconds, then turn it
back on.
Error displayed on the touchscreen or control panel.
•
Contact Wolf Factory Certified Service.
Oven "pops" or "bangs" during preheat or cool down.
•
Normal with new oven cavity expansion and
contraction.
•
Run the clean cycle. If it persists, contact Wolf
Customer Care at 800-222-7820.
Oven door is locked.
•
The oven door locks and remains locked until the clean
cycle has ended and the oven temperature is below
550°F
.
(290°C)
INDUCTION RANGETOP
Induction elements do not operate.
•
Verify power is on.
•
Verify electrical power to the range and home circuit
breaker is on.
•
The induction rangetop is in lock mode. Touch and
hold
for three seconds to unlock the control panel.
•
The rangetop automatically turns off after 2 hours of
continual use (high), 6 hours (medium), and 8 hours
(simmer).
Rangetop temperature issue.
•
Contact Wolf Customer Care at 800-222-7820.
Controls are slow to respond.
•
Verify the controls are clean and free of moisture.
•
Contact Wolf Customer Care at 800-222-7820.
wolfappliance.com | 25
Publicité
