Publicité
Les langues disponibles
Les langues disponibles
Rangetop Operation
Rangetop Operation
SINGLE ELEMENT
Setting controls:
Touch
.
1
2
To activate an element, touch the zone indicator for
the desired element on the control panel. Power level
indicators for that zone scroll.
Touch
for highest heat,
3
activate Boost mode, or touch the desired power level
indicator.
To change the heat setting while the element is on,
4
touch or slide to the desired power level.
5
Touch the zone indicator to clear a single element or
touch
to clear all elements.
IMPORTANT NOTE: The control flashes for 30 seconds
and turns the element off automatically if no cookware or
incompatible cookware is placed on an element.
22 | Wolf Customer Care 800.222.7820
for lowest heat,
to
BOOST MODE
Boost mode boosts power on one element by diverting
power from an adjacent element. If the adjacent element
is on high, the power output is reduced. The reduction
in power is displayed on the power level indicator of the
adjacent element.
illuminates when an element is in
Boost mode.
Boost mode deactivates automatically after approximately
15 minutes of continuous operation and can be reactivated
if desired.
Publicité
