Publicité
Les langues disponibles
Les langues disponibles
installation
electrical connection
general
Type of hob
Component voltage
Appliance width x depth
Installation height from
top of worktop
Cut out dimensions width x depth
Capacities of modules
Left
Right
GB 32
For the connection, use an approved cable, in accordance
with the regulations. The cable must bear one of the
following indications:
H05V2V2-F, H05RR-F or H05RN-F.
There is a label on the underside of the appliance with the
wiring diagrams. The connection terminals are accessible
once you have opened the junction box on the underneath.
The junction box cover can be opened with a screwdriver.
If you want to make a fixed connection, make sure that a
multi-polar switch with a contact separation of at least 3 mm
is fitted in the supply line.
Induction
230V 50Hz
774 X 522 mm
48 mm
750 x 490 mm
3600 W
3600 W
right zones
left zones
1
2
3
4
5
Publicité
