operation
switching on
boost
powerboost
switching off
residual-heat indicator
residual-heat indicator
GB 12
In setting '
' (boost), each cooking zone (except for the rear
left cooking zone) has a maximum capacity of 2800 W. Use
this setting if you want to bring dishes to the boil quickly.
The '
' setting is a special setting (3200 W) for heating up a
large quantity of a liquid dish extra quickly. The powerboost
capacity is available for 5 minutes. After 5 minutes, the
cooking zone automatically switches down to boost. For the
next 5 minutes, the powerboost is not available. But after
that it is available again.
The display shows the setting selected. The lights blink if
there is no pan on the cooking zone. The selected cooking
zone switches off automatically after a short time.
You can see which setting to select in the cooking tables on
pages 25 and 26.
Press the on/off switch again.
The cooking zone switches off.
The residual-heat indicator will continue to indicate that the
zone is hot if it still is.
The indicator shows that the cooking zone is still hot and
goes out as soon as the glass top reaches a safe
temperature. The indicator comes into operation after a zone
has been in use for 60 seconds and becomes visible after the
zone has been switched off.
Residual heat is shown in the display with an H.