GRE 83037503 Manuel De Montage page 329

4.10
JOINT PROTECTORS: TPL and TP.
(Only for 132 cm pools)
These pieces are to be fitted joining and protect-
ing the trim pieces. Joint protectors are made up
of 2 elements: Strim Piece protector (TPL) and
Vertical Section protector (TP). First, the back
side of TPL has to be fixed to the back side of
the 2 strim pieces. Then, it has to be tightened
to the front side of the pool, fixing the TPL verge
to the PU1 hole. Now, fix TP to TPL by the lower
TPL
side using a screw T1 to join them. This process is
to be repeated for all the joint protectors. ATTEN-
TION: For the straight area, the TP notch must be
removed so the part fits into the PV2.
TPL
TP
T1
TPL
E N
installation
TPL
TP
T1
PV
2 1